Master Appliance PH-1100K User Manual download pdf (Page 5)

The proper amount of heat for

each application is dependent

upon the distance of the noz-

zle from the work surface and

the length of time that heat is

applied to the work surface.

Before performing any appli-

cation, we recommend that

you experiment with a piece of

scrap material. Use care in

approaching the work until

you find the proper combina-

tion of heat adjustment con-

trol, distance from the work

surface, and the heat applica-

tion time.

Use a gentle back and forth

motion when applying heat

unless it is found that a con-

centrated heat is desired.

5

Operating Instructions

Typical Applications

CAUTION: Do not place unit

on its side while using

spreader or heat shrink

attachments.

To Operate Heat Gun

1) Plug heat gun into properly

rated outlet.

2) Move rocker switch to “Hot”

position. Heat gun will

come up to operating tem-

perature in approximately

two minutes.

3) Move switch to “Off” position.

Shrink Packaging

Use low or high heat

Shrink Tubing

Use low or high heat

Bend PVC Tubing

Use high heat

Dry Film

Use low heat

Strip Paint

Use low or high heat

Install Vinyl

Use low or high heat

1 2 3 4 5 6 7 8 9 10 ... 35 36

Comments to this Manuals

No comments